Home Page -
  PRODUCTS RANGEGuide To The System SacmaGuide To The System Ingramatic
  Guide To The System

Since 1939 we began and still continue to operate according to this corporate philosophy.
With constant determination, enthusiasm and earnest dedication we have been committed ever since, to privilege and unconditionally guarantee the absolute satisfaction of our customers.
As witness of our continued success in the field of cold forming, bolt making and warm forming equipment, always striving to reach ultimate perfection and full commitment to constant evolution, we build machines in, what today the industry considers, the most modern and best equipped manufacturing facility in the world.

Project, design and manufacturing technologies, that constantly foresee the future, in terms of innovation and absolute reliability, are integrated in perfect harmony with people, motivated by the certainty of cooperating in a decisive manner, for the creation of a product, which is beyond the edge of excellence.s
At a time when many of our competitors are relocating their production to low-cost countries, we, in order to guarantee our undisputed quality, are expanding our manufacturing facilities in the “Italian Fastener Valley”. For all the above we wish to assert once again our commitment to advise and assist you by manufacturing and supplying machines that will noticeably contribute in shaping, for you, an always better future, together.

PROGRESSIVE
CHARACTERISTICS SP 150 SP 150 U SP 160 SP 160 U SP 250 SP 250 U SP 260 SP 260 U SP 350 SP 360 SP 370 SP 460 SP 470 SP 560 SP 570 SP 570 C SP 660 A SP 670 A SP 670 AS
QUICK TOOL CHANGE CR*
Heading load KN 500 500 500 500 700 700 700 700 1.400 1.400 1.400 2.200 2.200 3.200 3.200 3.200 5.000 5.500 6.500
Number of dies 4 4 5 5 4 4 5 5 4 5 6 5 6 5 6 6 5 6 6
Cut-off diameter (600 N/mm2) mm 8 8 8 8 10,5 10,5 10,5 10,5 15 15 15 20 20 24 24 24 31 31 33
Cut-off length
(max) mm		 65 65 65 65 85 85 85 85 127 127 127 165 165 230 230 160 220 220 160
Die kick-out
(max) mm		 45 50 45 50 65 70 65 70 90 90 90 120 120 180 180 110 160 160 160
Punch knock-out (max) mm 14 14> 14 14 20 20 20 20 29,3 29,3 29,3 43,5 43,5 46,5 46,5 46,5 64 64 64<
Production per minute (max) No. 350 350 350 350 275 275 275 275 200 200 200 160 160 120 120 130 100 100 100
Main motor KW 26 26 26 26 30 30 30 30 45 45 45 75 75 100 100 100 150 150 150
TOOL POCKET SIZES
Die - ØxL mm 45x
70		 42x
77		 45x
70		 42x
77		 54x
90		 50x
100		 54x
90		 50x
100		 75x
125		 75x
125		 75x
125		 100x
165		 100x
195		 110x
225		 110x
225		 110x
225		 150x
295		 150x
295		 165x
295
Punch (fixed)
ØxL mm		 38x
85		 38x
85		 38x
85		 38x
85		 45x
100		 45x
100		 45x
100		 45x
100		 60x
125		 60x
125		 60x
125		 75x
170		 75x
170		 85x
170		 85x
170		 85x
170		 120x
235		 120x
235		 130x
235
Punch (sliding)
ØxL mm		 32x
85		 32x
85		 32x
85		 32x
85		 38x
100		 38x
100		 38x
100		 38x
100		 52x
125		 52x
125		 52x
125		 75x
170		 75x
170		 85x
170		 85x
170		 85x
170		 120x
235		 120x
235		 120x
235
Knife - Ø mm 20 20 20 20 29 29 29 29 38 38 38 55 55 60 60 60 70 70 70
Quill - Ø mm 21 21 21 21 30 30 30 30 39 39 39 68 68 78 78 78 100 100 100
WEIGHTS
Net mass Kg 9.000 9.000 9.500 9.500 14.500 14.500 15.000 15.000 23.000 24.000 26.000 41.000 45.000 48.000 50.000 50.000 110.000 125.000 130.000


LONG STROKE
CHARACTERISTICS SP 250 EL SP 260 EL SP 350 EL* SP 360 EL* SP 441 EL SP 660 AL SP 670 AL*
QUICK TOOL CHANGE CR*
Heading load KN 700 700 1.400 1.400 2.200 5.000 5.500
Number of dies 4 5 4 5 4 5 6
Cut-off diameter (600 N/mm2) mm 10,5 10,5 15 15 20 31 31
Cut-off length (max) mm 115 115 165 165 350 300 300
Die kick-out (max) mm 90 90 135 135 300 240 240
Punch knock-out (max) mm 20 20 29,3 29,3 43,5 64 64
Production per minute (max) No. 220 220 150 150 70 80 80
Main motor KW 30 30 45 45 75 150 150
TOOL POCKET SIZES
Die - ØxL mm 54x110 54x110 75x160 75x160 100x345 150x295 150x295
Punch (fixed) - ØxL mm 45x100 45x100 60x125 60x125 75x170 120x235 120x235
Punch (sliding) - ØxL mm 38x100 38x100 52x125 52x125 75x170 120x235 120x235
Knife - Ø mm 29 29 38 38 55 70 70
Quill - Ø mm 30 30 39 39 68 100 100
WEIGHTS
Net mass Kg 14.500 15.000 23.500 24.500 46.000 110.000 125.000

4 5 6 PROGRESSIVE



COMBINED
CHARACTERISTICS SP 17 SP 17 V SP 18 SP 18 V SP 27 SP 27 V SP 28 SP 28 V SP 37* SP 37* SP 38* SP 38 V* SP 48* SP 57* SP 58*
QUICK TOOL CHANGE CR*
Heading load KN 500 500 500 500 700 700 700 700 1.400 1.400 1.400 1.400 2.200 3.200 3.200
Number of dies 4 4 5 5 4 4 5 5 4 4 5 5 5 4 5
Cut-off diameter (600 N/mm2) mm 8 8 8 8 10,5 10,5 10,5 10,5 15 15 15 15 20 24 24
Cut-off length (max) mm 65 65 65 65 85 85 85 85 127 127 127 127 165 230 230
Die kick-out (max) mm 45 45 45 45 65 65 65 65 90 90 90 90 120 180 180
Punch knock-out
(max) mm		 14 14 14 14 20 20 20 20 29,3 29,3 29,3 29,3 43,5 46,5 46,5
Thread diameter
(max) 8.8/12.9 mm		 M6 M6 M6 M6 M10/M8 M10/M8 M10/M8 M10/M8 M14/M12 M14/M12 M14/M12 M14/M12 M20/M18 M24/M22 M24/M22
Thread length (max) mm 38 38 38 38 50,8 50,8 50,8 50,8 63,5 63,5 63,5 63,5 85 85 85
Shank length
(min÷max) mm		 10÷45 10÷45 10÷45 10÷45 14÷65 14÷65 14÷65 14÷65 20÷90 20÷90 20÷90 20÷90 25÷120 35÷180 35÷180
Production per minute (max) No. 350 350 350 350 275 275 275 275 200 200 200 200 160 120 120
Main motor KW 26 26 26 26 30 30 30 30 45 45 45 45 75 100 100
TOOL POCKET SIZES
Die - ØxL mm 45x70 45x70 45x70 45x70 54x90 54x90 54x90 54x90 75x125 75x125 75x125 75x125 100x165 110x225 110x225
Punch (fixed)
ØxL mm		 38x85 38x85 38x85 38x85 45x100 45x100 45x100 45x100 60x125 60x125 60x125 60x125 75x170 85x170 85x170
Punch (sliding)
ØxL mm		 32x85 32x85 32x85 32x85 38x100 38x100 38x100 38x100 52x125 52x125 52x125 52x125 75x170 85x170 85x170
Knife - Ø mm 20 20 20 20 29 29 29 29 38 38 38 38 55 60 60
Quill - Ø mm 21 21 21 21 30 30 30 30 39 39 39 39 68 78 78
Thread roll die moving X Y Z mm 106
41
13 		106
41
13 		106
41
13 		106
41
13 		146
54
16 		146
54
16 		146
54
16 		146
54
16 		216
67
21 		216
67
21 		216
67
21 		216
67
21 		254
89
22 		305
89
25 		305
89
25
Thread roll die stationary X Y Z mm 89
41
13 		89
41
13 		89
41
13 		89
41
13 		127
54
16 		127
54
16 		127
54
16 		127
54
16 		191
67
21 		191
67
21 		191
67
21 		191
67
21 		229
89
22 		280
89
25 		280
89
25
WEIGHTS                              
Net mass Kg 11.000 11.000 11.500 11.500 16.000 16.000musica 16.500 16.500 25.000 25.000 26.500 26.500 47.000 57.000 58.500

LONG STROKE
CHARACTERISTICS SP 27 EL SP 28 EL SP 37 EL* SP 38 EL*
QUICK TOOL CHANGE CR*
Heading load KN 700 700 1.400 1.400
Number of dies 4 5 4 5
Cut-off diameter (600 N/mm2) mm 10,5 10,5 15 15
Cut-off length (max) mm 115 115 165 165
Die kick-out (max) mm 90 90 135 135
Punch knock-out (max) mm 20 20 29,3 29,3
Thread diameter (max) 8.8/12.9 mm M10/M8 M10/M8 M14/M12 M14/M12
Thread length (max) mm 50,8 50,8 63,5 63,5
Shank length (min÷max) mm 90 90 135 135
Production per minute (max) No. 220 220 150 150
Main motor KW 30 30 45 45
TOOL POCKET SIZES
Die - ØxL mm 54x110 54x110 75x160 75x160
Punch (fixed) - ØxL mm 45x100 45x100 60x125 60x125 >
Punch (sliding) - ØxL mm 38x100 38x100 52x125 52x125
Knife - Ø mm 29 29 38 38
Quill - Ø mm 30 30 39 39
Thread roll die moving X Y Z mm 146
54
16 		146
54
16 		216
67
21 		216
67
21
Thread roll die stationary X Y Z mm 127
54
16 		127
54
16 		191
67
21 		191
67
21
WEIGHTS
Net mass Kg 16.000 16.500 25.500 27.000

4 5 COMBINED

Home page Sacma ingramatic obm Winning Technologies products range Cold Forming Machines Threadrolling Machines News Menù
Home Page Sacma Ingramatic OBM Winning
Technologies		 Products Range Cold Forming
Machines		 Thread Rolling
Machines		 News  


SACMA Limbiate S.p.A. - Viale dei Mille,126/128 - 20812 Limbiate (MB)
P.IVA: IT 00811010966 | Tel: +39 02 994521 | Fax: +39 02 99050185 | Policy Privacy | Credits | Newsletter subscrition